A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Textiles newsgroups » Sewing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Seeking a sewing mentor in West Hills/Canoga Park area



 
 
Thread Tools Display Modes
  #11  
Old January 2nd 10, 11:42 PM posted to rec.crafts.textiles.sewing
Kay Lancaster
external usenet poster
 
Posts: 256
Default Seeking a sewing mentor in West Hills/Canoga Park area

On Sat, 2 Jan 2010 01:39:08 -0800 (PST), Sarge
wrote:

second nature) but not how to work the blasted machine. Like having a


Most sewing machine stores have machine operation classes that are a very good
idea to take. Even if you didn't buy the machine there, it's often possible
to buy a few hours of instructional time on your machine specifically.

Or see if any of the teaching members of http://www.paccprofessionals.org
are near you. You may also want to consider joining ASG
(http://www.asg.org) and Patternreview (http://www.patternreview.com).

May I make some suggestions for you?

Books:
Carol Ahles: Fine Machine Sewing. Work through the basics chapters as soon as
you have some experience operating a machine. Yes, it looks fussier than you
probably want to do... do it anyhow. Particularly, tackle the chapters on
hemming and rehemming and narrow hemming fairly early on. It'll save you a
lot of time.

John Giordano: The Sewing Machine Guide. More on how to choose and use
various features of mechanical machines, as well as general machine care, but
it's got good stuff in it.

Gale Grigg Hazen: Owner's Guide to Sewing Machines, Sergers and Knitting
Machines. Care and feeding, and how bad sewing habits make good machines work
poorly, and can even damage the machine.

Nancy Bednar and Joann Pugh-Gannon: Encyclopedia of Sewing Machine Techniques.
Things you probably never thought of doing with a machine.

Videos and DVDs:
Connie Crawford: Studio Sewing Skills (consider buying the student packet, too).
Covers the processes used in garment sewing, starting with threading a machine
properly. A whole heck of a lot of "bad sewing machine" issues are actually
misthreaded sewing machine, bad needle, wrong needle, bad thread or incorrect
seam starting issues. Just for grins, take a look at:
http://www.picturetrail.com/sfx/album/view/22521551 and see if you recognize
any problems you've seen before. g

Islander Sewing Systems: lots of good stuff, but I'd suggest you may especially
want to pay attention to her pinless sewing methods. You'll see them on most
of the videos, but they're explicitly explained on the Industrial video,
starting about 12 minutes in.

Judy Barlup: Japanese Tailoring



Ads
  #12  
Old January 3rd 10, 08:20 AM posted to rec.crafts.textiles.sewing
Kathy Morgan
external usenet poster
 
Posts: 17
Default Seeking a sewing mentor in West Hills/Canoga Park area

Sarge wrote:

Wow..thank you all for the suggestions.

Kinda figured it wouldn't be that easy. Started sewing with a pretty
good idea how it worked (I'm a sculptor, so patterns and assembly are
second nature) but not how to work the blasted machine. Like having a
road atlas in your head, but not knowing how to operate a car. Thought
I might have good luck having a hands-on tutor to help me with fancy
bits (an instructor vs learning to drive via the driver's manual).


If it's mainly the machine, it might be worth while checking with the
HomeEc teacher of the nearest highschool or maybe even middle school;
s/he might be willing to spend half an hour with you acquainting you
with the basics of the machine, and that might be all you need to be up
and running.

Another possibility would be to check for a local quilting group.
Quilters love to snare new members into their craft and are very
generous about sharing their skills and experience. Many quilters also
sew garments, so if you attend a workshop you're likely to get more help
than you ever wanted. Your name suggests that you're a guy, which is an
advantage if you go to a quilting group. There aren't many guys
quilting, but some of the most famous and well known quilters (and
coutiers) are guys, so the ladies will probably fall all over themselves
to help you out, and any other guys present will be glad to have more
male reinforcement.

My goal is to be able to make structured, properly tailored clothes.
Got my eye on some nice waistcoats and a frock coat.


Pleats and darts are basically the same thing: with a pleat you just
fold the fabric over at the seam to make for instance the waist smaller,
but leave the body relaxed so you have room for shoulders or hips. The
pattern or maybe even the garment sketch will show whether to fold
toward or away from the center. Darts do the same job, but you sew them
down (and the trick is to sew from the wide area to the point and off
the fabric, then tie the thread.) For collars, the two main tips I'd
offer are 1) trim the points to reduce bulk so you get a nice point when
you turn it right side out, 2) clip just to but not across the seam line
to fit the collar to the neck opening or collar stand, and 3) grade the
seams. (Okay, so I can't count. There are three kinds of people in the
world: those who can count and those who can't.)

In fact, grading the seams will improve almost any part of the garment
where you have several layers of fabric. Grading means trimming away
the excess material from the seam allowance after you've sewn it,
trimming one layer (usually the innermost) very close to the stitching,
the next layer not quite so close, etc., so there's not a big hump of
layers of fabric all dropping off at the same point.

Making structured, properly tailored clothes is a whole other ballgame
that I've not yet gotten the nerve to try, but there's no reason why you
can't do it. I'd practice first by making an ordinary shirt, which is
going to involve basic skills with pleats, maybe a yoke, a collar and
maybe a collar stand, and cuffs. Cuffs are IMO a bit easier than
collars but it's a similar process, so you might want to do the cuffs
first. OTOH, facing the sleeve opening can be a real b*tch, depending
on the method used for that shirt, and fortunately waistcoats and
jackets use a different method to face the opening and skip the cuff
which just can't be as bad as a shirt sleeve opening.

--
Kathy
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sewing & Quilt Expo - Overland Park, Ks. - anyone going? Bonnie Quilting 12 October 16th 05 04:11 AM
free stash in Clifton Park, New York area [email protected] Quilting 4 August 10th 05 03:06 PM
Cleaning sewing area ALZ Quilting 5 May 23rd 05 04:03 PM
Boston area sewing get-togethers, and sewing for charity [email protected] Quilting 7 March 4th 05 02:12 AM
Boston area sewing get-togethers, and sewing for charity [email protected] Sewing 7 March 4th 05 02:12 AM


All times are GMT +1. The time now is 04:28 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.