If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Hi Sarahjane, I'll try that. I have alot of the page set up that way already
but not in an invisible cell. I didn't realize that would constrain it. Thanks for the tip. I'll try it out tomarrow and see what happens. -- Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... I'm not sure what it takes for everyone to see it the same way. you can make tables with cells, and put things in those, after you set your cell or table sizes. Try setting the table to 98%, or 580 pixels, and make it so the border is at 0, then it will be an invisible table that holds things in place. Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
Ads |
#12
|
|||
|
|||
Thanks for the tip. I'll try it out tomarrow and see what happens.
you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#13
|
|||
|
|||
Ok, I'm not sure if I did what you suggested Sarajane,or not... but I did
something. First I found out on my other computer, that if I used a default font the banner didn't expand. Previously I used a "balloon" font but the other computer was displaying a default font .That font was larger than my "balloon" font even though the font size number was the same, causing the banner to expand to accomodate the larger font and thus over lap. BUT on my husband's computer at work it was still displaying the overlapping banner. I have converted my "layers" to tables to see if that is similar to what you suggested. ( I'm using Dream Weaver). If y'all (this is the South) wouldn't checking again and see if my changes have made any difference over what you previously saw. I've only done this on the home page. There's no telling what may be happening on the other pages.... Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... Thanks for the tip. I'll try it out tomarrow and see what happens. you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#14
|
|||
|
|||
BUT on my
husband's computer at work it was still displaying the overlapping banner You may have to purge his cache and get off then back on line--I have to do that with AOL to see the new version, but NOT with the other browser that is NOT inside aol....machines are strange!!! Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#15
|
|||
|
|||
The header on the home page looks perfect now, but the header on *the
Process* page is wonky now. I feel for you. I wish I could offer constructive help. Alas, all I can do is look and report. Diana -- Queen of FAQs Royal Peace Maker http://photos.yahoo.com/lunamom44 "dawn" wrote in message r.com... Ok, I'm not sure if I did what you suggested Sarajane,or not... but I did something. First I found out on my other computer, that if I used a default font the banner didn't expand. Previously I used a "balloon" font but the other computer was displaying a default font .That font was larger than my "balloon" font even though the font size number was the same, causing the banner to expand to accomodate the larger font and thus over lap. BUT on my husband's computer at work it was still displaying the overlapping banner. I have converted my "layers" to tables to see if that is similar to what you suggested. ( I'm using Dream Weaver). If y'all (this is the South) wouldn't checking again and see if my changes have made any difference over what you previously saw. I've only done this on the home page. There's no telling what may be happening on the other pages.... Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... Thanks for the tip. I'll try it out tomarrow and see what happens. you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#16
|
|||
|
|||
Believe me that is very helpful! Thanks so much! I guess I'll need to check
my process page now and see whats up. Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Diana Curtis" wrote in message ... The header on the home page looks perfect now, but the header on *the Process* page is wonky now. I feel for you. I wish I could offer constructive help. Alas, all I can do is look and report. Diana -- Queen of FAQs Royal Peace Maker http://photos.yahoo.com/lunamom44 "dawn" wrote in message r.com... Ok, I'm not sure if I did what you suggested Sarajane,or not... but I did something. First I found out on my other computer, that if I used a default font the banner didn't expand. Previously I used a "balloon" font but the other computer was displaying a default font .That font was larger than my "balloon" font even though the font size number was the same, causing the banner to expand to accomodate the larger font and thus over lap. BUT on my husband's computer at work it was still displaying the overlapping banner. I have converted my "layers" to tables to see if that is similar to what you suggested. ( I'm using Dream Weaver). If y'all (this is the South) wouldn't checking again and see if my changes have made any difference over what you previously saw. I've only done this on the home page. There's no telling what may be happening on the other pages.... Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... Thanks for the tip. I'll try it out tomarrow and see what happens. you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#17
|
|||
|
|||
I made some changes on my process page. Is anything over lapping now?
Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "dawn" wrote in message r.com... Believe me that is very helpful! Thanks so much! I guess I'll need to check my process page now and see whats up. Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Diana Curtis" wrote in message ... The header on the home page looks perfect now, but the header on *the Process* page is wonky now. I feel for you. I wish I could offer constructive help. Alas, all I can do is look and report. Diana -- Queen of FAQs Royal Peace Maker http://photos.yahoo.com/lunamom44 "dawn" wrote in message r.com... Ok, I'm not sure if I did what you suggested Sarajane,or not... but I did something. First I found out on my other computer, that if I used a default font the banner didn't expand. Previously I used a "balloon" font but the other computer was displaying a default font .That font was larger than my "balloon" font even though the font size number was the same, causing the banner to expand to accomodate the larger font and thus over lap. BUT on my husband's computer at work it was still displaying the overlapping banner. I have converted my "layers" to tables to see if that is similar to what you suggested. ( I'm using Dream Weaver). If y'all (this is the South) wouldn't checking again and see if my changes have made any difference over what you previously saw. I've only done this on the home page. There's no telling what may be happening on the other pages.... Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... Thanks for the tip. I'll try it out tomarrow and see what happens. you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#18
|
|||
|
|||
Whoohoooo! It looks great!
ps... I do so admire your work. Its fun, and classy. Diana -- Queen of FAQs Royal Peace Maker http://photos.yahoo.com/lunamom44 "dawn" wrote in message r.com... I made some changes on my process page. Is anything over lapping now? Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "dawn" wrote in message r.com... Believe me that is very helpful! Thanks so much! I guess I'll need to check my process page now and see whats up. Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Diana Curtis" wrote in message ... The header on the home page looks perfect now, but the header on *the Process* page is wonky now. I feel for you. I wish I could offer constructive help. Alas, all I can do is look and report. Diana -- Queen of FAQs Royal Peace Maker http://photos.yahoo.com/lunamom44 "dawn" wrote in message r.com... Ok, I'm not sure if I did what you suggested Sarajane,or not... but I did something. First I found out on my other computer, that if I used a default font the banner didn't expand. Previously I used a "balloon" font but the other computer was displaying a default font .That font was larger than my "balloon" font even though the font size number was the same, causing the banner to expand to accomodate the larger font and thus over lap. BUT on my husband's computer at work it was still displaying the overlapping banner. I have converted my "layers" to tables to see if that is similar to what you suggested. ( I'm using Dream Weaver). If y'all (this is the South) wouldn't checking again and see if my changes have made any difference over what you previously saw. I've only done this on the home page. There's no telling what may be happening on the other pages.... Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... Thanks for the tip. I'll try it out tomarrow and see what happens. you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#19
|
|||
|
|||
Sorry Dawn, but I did find a small overlap on your "cake toppers page. "go to cake toppers & figurines page 2" (in white) overlaps the black info under it. (on both pages) Also there is a small type-o on the pics guidelines page. 2nd sentence, "If you can get hol of a digital camera" hol (d) I had no idea how much work goes into setting up a website. As for the WYSIWYG web software, I will ask my brother the computer guru, if he knows of any, and will post the info I find out for the group. Fabulous website and even better sculpting. I'm always awed by the work, of the good folks in this newsgroup. I am still aspiring to be even slightly as good as most of you! Of course, most of you have forgotten more then I have ever learned about polymer clay & sculpting. LOL Hope this helps you! Ms. Eli Quin (pronouned Ellie) "dawn" wrote in message r.com... I made some changes on my process page. Is anything over lapping now? Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "dawn" wrote in message r.com... Believe me that is very helpful! Thanks so much! I guess I'll need to check my process page now and see whats up. Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Diana Curtis" wrote in message ... The header on the home page looks perfect now, but the header on *the Process* page is wonky now. I feel for you. I wish I could offer constructive help. Alas, all I can do is look and report. Diana -- Queen of FAQs Royal Peace Maker http://photos.yahoo.com/lunamom44 "dawn" wrote in message r.com... Ok, I'm not sure if I did what you suggested Sarajane,or not... but I did something. First I found out on my other computer, that if I used a default font the banner didn't expand. Previously I used a "balloon" font but the other computer was displaying a default font .That font was larger than my "balloon" font even though the font size number was the same, causing the banner to expand to accomodate the larger font and thus over lap. BUT on my husband's computer at work it was still displaying the overlapping banner. I have converted my "layers" to tables to see if that is similar to what you suggested. ( I'm using Dream Weaver). If y'all (this is the South) wouldn't checking again and see if my changes have made any difference over what you previously saw. I've only done this on the home page. There's no telling what may be happening on the other pages.... Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... Thanks for the tip. I'll try it out tomarrow and see what happens. you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
#20
|
|||
|
|||
Thanks for taking the time to help me get things set up. I fixed (I think)
the typos and overlaps Eli found (actually "hol" is southern talk but I fixed it so it would be understood by non-Charlestonians) If anyone happens to find something that doesn't look right (besides the figurines) or isn't working properly please let me know. I still have a few pages to update so some pages have more than one style of buttons. I'll be getting to those soon. Again, Thanks VERY much! Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "eliquint" wrote in message ... Sorry Dawn, but I did find a small overlap on your "cake toppers page. "go to cake toppers & figurines page 2" (in white) overlaps the black info under it. (on both pages) Also there is a small type-o on the pics guidelines page. 2nd sentence, "If you can get hol of a digital camera" hol (d) I had no idea how much work goes into setting up a website. As for the WYSIWYG web software, I will ask my brother the computer guru, if he knows of any, and will post the info I find out for the group. Fabulous website and even better sculpting. I'm always awed by the work, of the good folks in this newsgroup. I am still aspiring to be even slightly as good as most of you! Of course, most of you have forgotten more then I have ever learned about polymer clay & sculpting. LOL Hope this helps you! Ms. Eli Quin (pronouned Ellie) "dawn" wrote in message r.com... I made some changes on my process page. Is anything over lapping now? Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "dawn" wrote in message r.com... Believe me that is very helpful! Thanks so much! I guess I'll need to check my process page now and see whats up. Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Diana Curtis" wrote in message ... The header on the home page looks perfect now, but the header on *the Process* page is wonky now. I feel for you. I wish I could offer constructive help. Alas, all I can do is look and report. Diana -- Queen of FAQs Royal Peace Maker http://photos.yahoo.com/lunamom44 "dawn" wrote in message r.com... Ok, I'm not sure if I did what you suggested Sarajane,or not... but I did something. First I found out on my other computer, that if I used a default font the banner didn't expand. Previously I used a "balloon" font but the other computer was displaying a default font .That font was larger than my "balloon" font even though the font size number was the same, causing the banner to expand to accomodate the larger font and thus over lap. BUT on my husband's computer at work it was still displaying the overlapping banner. I have converted my "layers" to tables to see if that is similar to what you suggested. ( I'm using Dream Weaver). If y'all (this is the South) wouldn't checking again and see if my changes have made any difference over what you previously saw. I've only done this on the home page. There's no telling what may be happening on the other pages.... Dawn Stubitsch http://www.thumbprintkids.com http://www.thumbprintkids.com/pages/caketoppers.html "Sjpolyclay" wrote in message ... Thanks for the tip. I'll try it out tomarrow and see what happens. you are welcome! What program are you using to build your pages? I use adobe page mill---used to use frontpage but it uses its own code that is not the same in all browsers, especially for Bold, Italic, and font sizes, etc. It also really helps to get yourself a version of IE and NetscapeNav. both, so you can open a finished page there and see what it looks like in both. WYSIWYG t'aint always so.... Sarajane Sarajane's Polymer Clay Gallery http://www.polyclay.com |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
web site suggestion | Barbara Otterson | Beads | 38 | March 18th 04 01:54 AM |
Mary Ann | Beads | 6 | October 20th 03 04:11 AM | |
Apology and New Web Site AD | Kandice Seeber | Beads | 0 | September 19th 03 05:47 PM |
Change of auction handle/ID and Web Site Name | CrystalLuv | Beads | 6 | August 24th 03 05:36 AM |