If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What I was up to today
I went to Harbor Freight today to get a tubing cutter, and a box of
copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg -- -Kalera http://www.beadwife.com |
Ads |
#2
|
|||
|
|||
What I was up to today
Sobbing and running away...
KLUNK Barbara Bead & Polymer Clay Habitué There is a very fine line between a hobby and mental illness. (Dave Barry) http://www.penguintrax.com http://www.backseatgrammarian.com http://www.polymerclayworkshops.com Kalera wrote: I went to Harbor Freight today to get a tubing cutter, and a box of copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg |
#3
|
|||
|
|||
What I was up to today
OOOOOOOOOOOOOOOOOOH...i've missed you, Kalera...LOL
-- Jenn in Tacoma www.jalynne.etsy.com "Kalera" wrote in message . .. I went to Harbor Freight today to get a tubing cutter, and a box of copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg -- -Kalera http://www.beadwife.com |
#4
|
|||
|
|||
What I was up to today
Those are so pretty!! I want to learn that!!
-- Jerri www.beadbimbo.com "Kalera" wrote in message . .. I went to Harbor Freight today to get a tubing cutter, and a box of copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg -- -Kalera http://www.beadwife.com |
#5
|
|||
|
|||
What I was up to today
Ok, probably a dumb question, but why doesn't the silver tubing split? Are
you hammering it to get the ends to open up and flatten? -- Jerri www.beadbimbo.com "Kalera" wrote in message . .. I went to Harbor Freight today to get a tubing cutter, and a box of copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg -- -Kalera http://www.beadwife.com |
#6
|
|||
|
|||
What I was up to today
Kalera,
Wow! More tempting beads. I especially like the ones with the stamped designs. Patti |
#7
|
|||
|
|||
What I was up to today
Lovely!!!!!!! I'm wondering how copper tubing would do. I have a lot of
that lying around right now. Hmmmm. Thanks for the iinspiration Kalera - those are gorgeous! Susan B. In article , Kalera wrote: I went to Harbor Freight today to get a tubing cutter, and a box of copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg -- Susan in CA(NADA) EBay auctions: http://tinyurl.com/usu2m |
#8
|
|||
|
|||
What I was up to today
Fabulous, I love the middle top one.
Would make a lovely focal bead. Hugs Shirley In message , Kalera writes I went to Harbor Freight today to get a tubing cutter, and a box of copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg -- Shirley Shone http://www.allcrafts.org.uk |
#9
|
|||
|
|||
What I was up to today
Thanks you guys!!! Jerri, it's not terribly hard! You need a dapping set (for flaring the tubing) and you have to anneal the metal first to soften it, and you also need a small brass hammer. Susan, copper works great! I have a small set of copper-cored beads I'm going to photograph today. -- -Kalera http://www.beadwife.com |
#10
|
|||
|
|||
What I was up to today
SQUEAL!!!! Love 'em!
Gina Kalera wrote: I went to Harbor Freight today to get a tubing cutter, and a box of copper washers caught my eye... so I snagged it and have been playing with riveting and coring beads for the last two hours! I'm really happy with the combination of copper and silver, especially on the transparent freen bead at the upper right: http://beadwife.com/xv/shop/images/items/8623.2.jpeg |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
So, what is everyone doing today? | Karen C - California | Needlework | 169 | September 5th 06 03:10 PM |
Ot Today i sit | Mirjam Bruck-Cohen | Yarn | 6 | April 9th 06 04:16 AM |
OT - today is THE BIG DAY | Cheryl | Beads | 21 | November 12th 04 05:01 AM |
A little better today | Barbara Forbes-Lyons | Beads | 4 | November 20th 03 10:49 PM |