A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Textiles newsgroups » Needlework
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Printing out the SAL



 
 
Thread Tools Display Modes
  #1  
Old March 19th 09, 01:11 PM posted to rec.crafts.textiles.needlework
MargW
external usenet poster
 
Posts: 523
Default Printing out the SAL

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW
  #2  
Old March 19th 09, 06:07 PM posted to rec.crafts.textiles.needlework
ellice
external usenet poster
 
Posts: 2,939
Default Printing out the SAL

On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.


Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW


FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I took
of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and
1/16 Kreinik ribbon. Personally, I just don't like working with the riboon
floss, and find the PSR nicer to work with.

Ellice

  #3  
Old March 19th 09, 07:41 PM posted to rec.crafts.textiles.needlework
MargW
external usenet poster
 
Posts: 523
Default Printing out the SAL

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.


Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW


FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I took
of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and
1/16 Kreinik ribbon. Personally, I just don't like working with the riboon
floss, and find the PSR nicer to work with.

Ellice



Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.

MargW
  #4  
Old March 19th 09, 07:51 PM posted to rec.crafts.textiles.needlework
ellice
external usenet poster
 
Posts: 2,939
Default Printing out the SAL

On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.


Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW


FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I took
of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and
1/16 Kreinik ribbon. Personally, I just don't like working with the riboon
floss, and find the PSR nicer to work with.

Ellice



Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.

MargW


You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.

ellice

  #5  
Old March 19th 09, 08:24 PM posted to rec.crafts.textiles.needlework
lucille
external usenet poster
 
Posts: 1,035
Default Printing out the SAL


"ellice" wrote in message
...
On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a
Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with the
riboon
floss, and find the PSR nicer to work with.

Ellice



Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.

MargW


You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.

ellice


I only saw one photo and when I tried to get the PDF file I got a message
saying it wasn't "Accessible."


  #6  
Old March 19th 09, 08:53 PM posted to rec.crafts.textiles.needlework
[email protected]
external usenet poster
 
Posts: 77
Default Printing out the SAL

On Mar 19, 4:24 pm, "lucille" wrote:
"ellice" wrote in message

...



On 3/19/09 3:41 PM, "MargW" wrote:


ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:


I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.


If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a
Word
document. You can then save and print it.


Good hint for people.


Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.


MargW


FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with the
riboon
floss, and find the PSR nicer to work with.


Ellice


Thanks, Ellice:


I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.


MargW


You're welcome. I've no doubt you'll find something fun!


Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.


ellice


I only saw one photo and when I tried to get the PDF file I got a message
saying it wasn't "Accessible."



I can view the photos, but the files come up as unaccessible.

Donna in Virginia
  #7  
Old March 19th 09, 09:26 PM posted to rec.crafts.textiles.needlework
ellice
external usenet poster
 
Posts: 2,939
Default Printing out the SAL

On 3/19/09 4:24 PM, "lucille" wrote:


"ellice" wrote in message
...
On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:

*snip*
MargW


You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.

ellice


I only saw one photo and when I tried to get the PDF file I got a message
saying it wasn't "Accessible."

I have no idea what the issue is with the files. But I may re-upload them
in a while. Hopefully someone else will check that they can see them - one
is pdf, the other Word.

WRT pictures - I'm almost done uploading, and then will re-organize the
album. Yahoo is being finicky.

Ellice

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Printing help? Johanna Gibson Quilting 3 January 22nd 08 02:39 PM
Printing on fabric Julianne Seekel Quilting 4 November 27th 05 06:46 PM
Printing my own fabrics. Wendys Quilting 11 June 8th 05 07:04 PM
?s re fabric printing Kellie J. Berger Quilting 15 June 15th 04 03:42 PM
Printing Bud Spotts Marketplace 1 December 28th 03 04:44 PM


All times are GMT +1. The time now is 01:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.