If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Marching towards fine knitting
First, I wish to thank Els van Dam for sending me a big bunch of stuff on
knitting sticks (de breischede). Some uncharitable folks might call it "evil enablement' but I think it was sweet and she is very generous of her time and treasure. Second, this morning, I made a reproduction of a "goose wing" knitting sheath based on http://www.daelnet.co.uk/features/knitting/thumbnl.htm. (the picture of 4 sheaths, 2d from the right). The material I used was oak with the needle hole lined with brass. The length of the finished sheath was 6.75". The needle hole was sized for US #00 needles, and the needles I am using it with are 11 inches long. The level of craftsmanship was "functional" with a comfortable beeswax finish. I doubt if a better finish would improve functionality. The texture of the end grain as it fits over the point of my hip seems to be an element of how it works. From which I surmise that the original was made for a man that wore and apron : ) (Women have different shaped hips.) It is also clear that the sheath to the far right was made to tuck under a belt or sash. My sheath was made entirely with a very limited set of hand tools including a coping saw, utility knife, wood rasp, drill, and pliers. Total time to make was under 2 hours. My version was made in one piece rather than having a separate, turned, needle holder. Many knitting sheaths of this small size are described in museum catalogues as "small," often with a notation that it might be for a child. Having actually knitted with this object, I can assure you that it works very well indeed with these steel needles. It's small size allows it to tuck comfortably under apron strings and it holds the needle and knitting quite securely. This not a child's toy. It is the right size for a #00 knitting sheath. Knitting motion with #00 needles with a sheath is somewhat different from what I have developed for the #1 needles, in that the outer few inches of the needle is flexed the thumb and forefinger to produce the knitting action. This motion is certainly much faster than anything that I can achieve with other methods of hand knitting with #00s (i.e., without a sheath.) This opens up the possibility of really producing useful amounts of knitting at a gauge of 10 to 12 spi with the fine patterning that a tight gauge allows. I really love the texture of the swatch that I did this morning with some Bartlett's sport yarn. This really opens up new vistas in knitting for me. Third. Over the weekend I found myself sitting next to a Professior of Asian Studies. She told me that there is a ancient tradition in Asia of using two needles to loop spun yarn into lace, i.e., knitting lace. To put her use of the work "ancient" into context, she said her ~ 200 year old jade pendent was just "new jade." I think this opens up a whole new avenue into the history of knitting. |
Ads |
#3
|
|||
|
|||
Marching towards fine knitting
In article ,
wrote: First, I wish to thank Els van Dam for sending me a big bunch of stuff on knitting sticks (de breischede). Some uncharitable folks might call it "evil enablement' but I think it was sweet and she is very generous of her time and treasure. hummmm evil enablement you say...???!! LOL I am sure that some of these old sheaths or breischede will inspire you....LOL Els -- Ja for Jazz and cobra loose the rrrrrrrr |
#4
|
|||
|
|||
Marching towards fine knitting
wrote:
First, I wish to thank Els van Dam for sending me a big bunch of stuff on knitting sticks (de breischede). Some uncharitable folks might call it "evil enablement' but I think it was sweet and she is very generous of her time and treasure. Second, this morning, I made a reproduction of a "goose wing" knitting sheath based on http://www.daelnet.co.uk/features/knitting/thumbnl.htm. (the picture of 4 sheaths, 2d from the right). The material I used was oak with the needle hole lined with brass. The length of the finished sheath was 6.75". The needle hole was sized for US #00 needles, and the needles I am using it with are 11 inches long. The level of craftsmanship was "functional" with a comfortable beeswax finish. I doubt if a better finish would improve functionality. The texture of the end grain as it fits over the point of my hip seems to be an element of how it works. From which I surmise that the original was made for a man that wore and apron : ) (Women have different shaped hips.) It is also clear that the sheath to the far right was made to tuck under a belt or sash. My sheath was made entirely with a very limited set of hand tools including a coping saw, utility knife, wood rasp, drill, and pliers. Total time to make was under 2 hours. My version was made in one piece rather than having a separate, turned, needle holder. Many knitting sheaths of this small size are described in museum catalogues as "small," often with a notation that it might be for a child. Having actually knitted with this object, I can assure you that it works very well indeed with these steel needles. It's small size allows it to tuck comfortably under apron strings and it holds the needle and knitting quite securely. This not a child's toy. It is the right size for a #00 knitting sheath. Knitting motion with #00 needles with a sheath is somewhat different from what I have developed for the #1 needles, in that the outer few inches of the needle is flexed the thumb and forefinger to produce the knitting action. This motion is certainly much faster than anything that I can achieve with other methods of hand knitting with #00s (i.e., without a sheath.) This opens up the possibility of really producing useful amounts of knitting at a gauge of 10 to 12 spi with the fine patterning that a tight gauge allows. I really love the texture of the swatch that I did this morning with some Bartlett's sport yarn. This really opens up new vistas in knitting for me. Third. Over the weekend I found myself sitting next to a Professior of Asian Studies. She told me that there is a ancient tradition in Asia of using two needles to loop spun yarn into lace, i.e., knitting lace. To put her use of the work "ancient" into context, she said her ~ 200 year old jade pendent was just "new jade." I think this opens up a whole new avenue into the history of knitting. Great pictures Aaron, I really enjoyed them. Let us know how your first several projects on the sheath turns out. Hugs & God bless, Dennis & Gail |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The Gross Errors of a Needle Maker: 000, 00, 0, | Yarn | 29 | June 20th 06 06:16 AM | |
How did you all get started knitting | [email protected] | Yarn | 32 | June 10th 06 09:29 AM |
Up the old style knitting learning curve. | Yarn | 0 | January 13th 06 08:41 PM | |
Hard S.E.X.; The Search for Golden Needles | Yarn | 6 | January 5th 06 09:09 PM |