If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Featherweight with 220V motor?
Do any of you (in the US) have a Featherweight with the European
(220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. |
Ads |
#2
|
|||
|
|||
Featherweight with 220V motor?
On Apr 14, 11:30 am, TinaR wrote:
Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. TinaR, I have a 222k with the 220v motor, the converters work great. They are inexpensive too. My cousin bought one also and is going to replace the 220v motor with a 110v. That costs about 3x than the converter. This is the one I bought http://www.voltageconverters.com/itemdesc.asp?ic=VC200W you can get the 300v but it is not advised to go to the smaller one because it will make your motor run a little hotter. Just my experience, hope it helps, Marsha in nw, OH |
#3
|
|||
|
|||
Featherweight with 220V motor?
On Apr 14, 1:21 pm, threads wrote:
On Apr 14, 11:30 am, TinaR wrote: Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. TinaR, I have a 222k with the 220v motor, the converters work great. They are inexpensive too. My cousin bought one also and is going to replace the 220v motor with a 110v. That costs about 3x than the converter. This is the one I bought http://www.voltageconverters.com/itemdesc.asp?ic=VC200W you can get the 300v but it is not advised to go to the smaller one because it will make your motor run a little hotter. Just my experience, hope it helps, Marsha in nw, OH Thanks, Marsha! I don't know why I'm having machine envy. I have a Bernina 153QE, which is great, but it really is not as smooth as I would like. I have been mulling a 221, and also the Juki long-bed model for machine quilting. I've thought about selling the Bernina, and using a 221 for piecing and the Juki for quilting, but that leaves me with two straight-stitch machines, so that in the event I actually do need to blind-stitch or zigzag, I am out of luck. |
#4
|
|||
|
|||
Featherweight with 220V motor?
On Apr 14, 3:43 pm, TinaR wrote:
On Apr 14, 1:21 pm, threads wrote: On Apr 14, 11:30 am, TinaR wrote: Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. TinaR, I have a 222k with the 220v motor, the converters work great. They are inexpensive too. My cousin bought one also and is going to replace the 220v motor with a 110v. That costs about 3x than the converter. This is the one I bought http://www.voltageconverters.com/itemdesc.asp?ic=VC200W you can get the 300v but it is not advised to go to the smaller one because it will make your motor run a little hotter. Just my experience, hope it helps, Marsha in nw, OH Thanks, Marsha! I don't know why I'm having machine envy. I have a Bernina 153QE, which is great, but it really is not as smooth as I would like. I have been mulling a 221, and also the Juki long-bed model for machine quilting. I've thought about selling the Bernina, and using a 221 for piecing and the Juki for quilting, but that leaves me with two straight-stitch machines, so that in the event I actually do need to blind-stitch or zigzag, I am out of luck. I don't understand why you can't have more than 2 machine! The Featherweights are wonderful for piecing, they have a beautiful straight stitch and run so sweetly. I love your Juki Idea and I really think you need the 153 for all of its' decorative stitches. I won't tell you have many sewing machine I have. Yes, I have my few favorites but I love sewing on all of them. Hope you get your 221 and the converter. I think you will love it! Keep me posted, Marsha in nw, OH |
#5
|
|||
|
|||
Featherweight with 220V motor?
On Apr 14, 3:12 pm, threads wrote:
On Apr 14, 3:43 pm, TinaR wrote: On Apr 14, 1:21 pm, threads wrote: On Apr 14, 11:30 am, TinaR wrote: Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. TinaR, I have a 222k with the 220v motor, the converters work great. They are inexpensive too. My cousin bought one also and is going to replace the 220v motor with a 110v. That costs about 3x than the converter. This is the one I bought http://www.voltageconverters.com/itemdesc.asp?ic=VC200W you can get the 300v but it is not advised to go to the smaller one because it will make your motor run a little hotter. Just my experience, hope it helps, Marsha in nw, OH Thanks, Marsha! I don't know why I'm having machine envy. I have a Bernina 153QE, which is great, but it really is not as smooth as I would like. I have been mulling a 221, and also the Juki long-bed model for machine quilting. I've thought about selling the Bernina, and using a 221 for piecing and the Juki for quilting, but that leaves me with two straight-stitch machines, so that in the event I actually do need to blind-stitch or zigzag, I am out of luck. I don't understand why you can't have more than 2 machine! The Featherweights are wonderful for piecing, they have a beautiful straight stitch and run so sweetly. I love your Juki Idea and I really think you need the 153 for all of its' decorative stitches. I won't tell you have many sewing machine I have. Yes, I have my few favorites but I love sewing on all of them. Hope you get your 221 and the converter. I think you will love it! Keep me posted, Marsha in nw, OH I like your thinking, Marsha. ;-) You remind me of my favorite quilting (and really, non-quilting) buddy, who never thinks there is such a thing as having to choose between two wonderful things. Life is too short, she says. She's the one who was in the passenger seat the day I marched right in an bought the Bernina 153. |
#6
|
|||
|
|||
Featherweight with 220V motor?
I don't use a european motor here in the US. There are so many
221's around I can't imagine why you just don't keep looking for one of those. If you are referring to Ebay prices those traditionally come down after mothers day and into the summer they tend to hit bottom price wise. 222's I would imagine putting up with a convertor but not a 221. If price is a consideration look into 301's. Although I have a couple 221's still here ( I have sold a mess over the years) I prefer to piece on a 301. I like taking them to classes too. Out of a case they are easy to carry using their handle and they are stronger than a FW too. You could probably get a 301 card table and a whole machine set up for less than a FW that needs a convertor. Good luck with whatever you end up with though. Taria TinaR wrote: Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. |
#7
|
|||
|
|||
Featherweight with 220V motor?
On Apr 14, 4:59 pm, TinaR wrote:
On Apr 14, 3:12 pm, threads wrote: On Apr 14, 3:43 pm, TinaR wrote: On Apr 14, 1:21 pm, threads wrote: On Apr 14, 11:30 am, TinaR wrote: Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. TinaR, I have a 222k with the 220v motor, the converters work great. They are inexpensive too. My cousin bought one also and is going to replace the 220v motor with a 110v. That costs about 3x than the converter. This is the one I bought http://www.voltageconverters.com/itemdesc.asp?ic=VC200W you can get the 300v but it is not advised to go to the smaller one because it will make your motor run a little hotter. Just my experience, hope it helps, Marsha in nw, OH Thanks, Marsha! I don't know why I'm having machine envy. I have a Bernina 153QE, which is great, but it really is not as smooth as I would like. I have been mulling a 221, and also the Juki long-bed model for machine quilting. I've thought about selling the Bernina, and using a 221 for piecing and the Juki for quilting, but that leaves me with two straight-stitch machines, so that in the event I actually do need to blind-stitch or zigzag, I am out of luck. I don't understand why you can't have more than 2 machine! The Featherweights are wonderful for piecing, they have a beautiful straight stitch and run so sweetly. I love your Juki Idea and I really think you need the 153 for all of its' decorative stitches. I won't tell you have many sewing machine I have. Yes, I have my few favorites but I love sewing on all of them. Hope you get your 221 and the converter. I think you will love it! Keep me posted, Marsha in nw, OH I like your thinking, Marsha. ;-) You remind me of my favorite quilting (and really, non-quilting) buddy, who never thinks there is such a thing as having to choose between two wonderful things. Life is too short, she says. She's the one who was in the passenger seat the day I marched right in an bought the Bernina 153. Life IS too short. There are a lot of good machines out there that are reasonably priced if that is an issue. I find each machine has its' own special talent and you should sew on several different brands and models to find the one that "talks" to you. Once you find it, hang on to it. If you sell it you will miss it. LOL I love the "new" featherweight I have. It sews like a dream and is just too fun to look at. The converter is less than $30 with shipping. That is almost the same as the Tax that I paid on my featherweight! Odd, don't you think? Peace, Marsha in nw, OH |
#8
|
|||
|
|||
Featherweight with 220V motor?
On Apr 14, 6:36 pm, Taria wrote:
I don't use a european motor here in the US. There are so many 221's around I can't imagine why you just don't keep looking for one of those. If you are referring to Ebay prices those traditionally come down after mothers day and into the summer they tend to hit bottom price wise. 222's I would imagine putting up with a convertor but not a 221. If price is a consideration look into 301's. Although I have a couple 221's still here ( I have sold a mess over the years) I prefer to piece on a 301. I like taking them to classes too. Out of a case they are easy to carry using their handle and they are stronger than a FW too. You could probably get a 301 card table and a whole machine set up for less than a FW that needs a convertor. Good luck with whatever you end up with though. Taria TinaR wrote: Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. Taria is right, the Singer 301 is great alternative to the 221. It has the same bobbin case as the featherweight. It is a slant needle. Gear driven. I have 2, one black and one two tone. They both free motion "to dye for". ;-) Yes, you can even drop the feed dogs on the 301, if you must. JMHO, Marsha in nw, OH |
#9
|
|||
|
|||
Featherweight with 220V motor?
I've been happily using a 220V sewing machine with a voltage
converter. You do have to check to make sure you get one powerful enough, not all labels have the wattage on, but power is voltage times current, so if it's a 220V machine and it tells you use a 13amp fuse, multiply 220*13 and you've got a max wattage, but I think sewing machines are much lower current than that. When we were buying a transformer there wasn't a mega choice of wattage, but a big jump in price to get a bigger one when you don't need it! Ours is 500W, the next available was 2000W and it was a lot more, I'd be surprised if any sewing machine needed that much power. Cheers Anne |
#10
|
|||
|
|||
Featherweight with 220V motor?
So that's where all the 220v Featherweights have disappeared to! I keep
going to flea markets and such, hoping to stumble over such a treasure. BTW, my 110v works just fine with a converter. It's just not a very pretty object and seems to get in my way, down on the floor with the pedal next to it. Roberta in D "TinaR" schrieb im Newsbeitrag ... Do any of you (in the US) have a Featherweight with the European (220v) motor? How well do the converters work? I am coveting a 221, and have noticed that the ones with the 220v motors sell for a lot less here on this side of the pond. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
new motor for shimpo rk2 for sale | arkey03755 | Pottery | 1 | July 18th 11 05:03 PM |
Knitting motor question | hippielady | Machine Knit | 1 | November 8th 07 07:29 PM |
Atlas motor usage | TheDormouse | Polymer Clay | 4 | January 20th 07 06:38 PM |
foredom micro motor | tom kroll | Carving | 0 | April 20th 06 03:17 PM |
OT washing out motor oil smell? | Julia Altshuler | Quilting | 17 | December 23rd 04 08:00 PM |