![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I am having problems getting the pieces not to "slip" when stitching. I
can' seem to find any tips on how to keep them aligned under the foot....anyone with helpful hints that have worked for them? thanks! |
Ads |
#2
|
|||
|
|||
![]()
Sometimes when I sew slippery fabrics, I put a strip of tissue paper between
the pieces at the seam. Tissue is very easy to tear out when finished; other times, I pin well inside the seam line, placing them horizontal, so they can be left till the garment is completed. I'm sure other readers will have different ideas. Emily |
#3
|
|||
|
|||
![]() Dear Fiveda, Corduroy can be sewn the same as velvet. First, make sure that you've cut all the pieces in the same direction. It's very obvious is they aren't, as the pile catches light differently. For sewing, press the two layers together, and rub them tightly together. This will cause the pile to lock together, no pins needed. In fact, pins will cause you grief. After you lock the layers together, hold the bottom of the layers together, and keep lifting your work as you sew, so that the layers will ease together. If they begin to slip, about half way down the seam, take the work out of the machine and turn it around, and sew from the opposite direction. The rubbing of the layers together is the trick. Teri |
#4
|
|||
|
|||
![]()
On 1 Dec 2006 10:34:43 -0800, wrote:
[snip] I can' seem to find any tips on how to keep them aligned under the foot....anyone with helpful hints that have worked for them? It helps to put the pins exactly in the stitching line, with the points toward the needle so that they can be pulled out at the last minute. Sometimes I'll hold a pin with tweezers and let the machine pull the fabric off it while the point is actually inside the presser foot. (This is NOT something to be done with the pedal to the metal!) Joy Beeson -- joy beeson at comcast dot net http://roughsewing.home.comcast.net/ -- needlework http://n3f.home.comcast.net/ -- Writers' Exchange The above message is a Usenet post. I don't recall having given anyone permission to use it on a Web site. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Euro-Pro or Craft-N-Sew Sewing Machine | Catherine K. | Needlework | 2 | August 25th 05 11:56 AM |
FAQ, QOM, QuiltPro questions. | Betsy Ross | Quilting | 9 | March 23rd 05 04:39 PM |
Sewing Machine FAQ | Diana Curtis | Quilting | 0 | November 2nd 04 11:47 PM |
ISO Plastic Sewing "Basket" | Tia Mary-remove nekoluvr to reply | Sewing | 2 | September 18th 04 10:42 PM |
FS: cross stitch and sewing books | Lisa | Marketplace | 0 | August 20th 04 01:12 AM |