A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Textiles newsgroups » Needlework
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Working Over 2 Threads



 
 
Thread Tools Display Modes
  #1  
Old July 11th 04, 07:28 AM
Suzanne
external usenet poster
 
Posts: n/a
Default Working Over 2 Threads

Looking at different books and magazines, I've found many over-2
patterns I'd like to do sometime. Though I have yet to work anything
over 2 threads, I'm a little confused about something. Actually, I
think I've done one piece, but it's been a very long time and it didn't
have any special stitches in it. It's the special stitches that I
puzzle over. When there's a small diagram that shows how to do a
certain stitch, do I follow it just the way it's shown or do I double
it like the cross stitches? Take Hardanger for example: If the
diagram shows the Kloster blocks going over 4 threads, do I do just the
4 or double it to 8? Or if an eyelet stitch shows it over 3 threads on
the longest vertical and horizontal legs, is it just 3 or 6? Sorry if
this seems like a silly question, but my poor mind tends to boggle when
trying (or even thinking about doing) something new.

--
Suze
Cat hair? That's just an embellishment.

Ads
  #2  
Old July 11th 04, 01:22 PM
NYC Chicka
external usenet poster
 
Posts: n/a
Default

Looking at different books and magazines, I've found many over-2
patterns I'd like to do sometime. Though I have yet to work anything
over 2 threads, I'm a little confused about something. Actually, I
think I've done one piece, but it's been a very long time and it didn't
have any special stitches in it. It's the special stitches that I
puzzle over. When there's a small diagram that shows how to do a
certain stitch, do I follow it just the way it's shown or do I double
it like the cross stitches? Take Hardanger for example: If the
diagram shows the Kloster blocks going over 4 threads, do I do just the
4 or double it to 8? Or if an eyelet stitch shows it over 3 threads on
the longest vertical and horizontal legs, is it just 3 or 6? Sorry if
this seems like a silly question, but my poor mind tends to boggle when
trying (or even thinking about doing) something new.

Not silly, Suze. If you're not familiar with it then it's a perfectly
legitimate question. =)

Most specialty stitches are charted to show it being worked on a
linen/evenweave type of fabric. Therefore, if the chart shows it goes over 4
threads, then you only need to go over 4 threads on your linen/evenweave.

Depending upon the age of your normal cross stitch charts... they might have
charted regular cross stitches as if they were on Aida so it would just show
one block. That's why you're getting confused with the *needing to double it
like the cross stitches.* Most (many) newer charts show the regular stitches
over two threads as well.

Enjoy the new experience. Do you have any friends around that stitch on
linen/evenweave, or do you think the women at your LNS do? Sometimes it's
easier to have them look over your first attempts until you get the hang of
it... predominantly just to make sure your bottom stitches go from vertical
thread to vertical thread.

wendy
  #3  
Old July 11th 04, 03:44 PM
Jacqueline
external usenet poster
 
Posts: n/a
Default

Suzanne, read the instructions carefully. Most designers specify whether
the stitch diagrams are charted over one or two threads. Also, you can
usually tell by comparing the design chart to the stitch diagram.

Don't let a little uncertainty stop you from branching out into something
different. You'll find that you learn as you go, and can always come back
here if you're still not sure. Good luck!

--
Jacqueline
Carmichaels PA
"Suzanne" wrote in message
news:200407110128552781%suzette40@comcastcrossnets titch...
Looking at different books and magazines, I've found many over-2
patterns I'd like to do sometime. Though I have yet to work anything
over 2 threads, I'm a little confused about something. Actually, I
think I've done one piece, but it's been a very long time and it didn't
have any special stitches in it. It's the special stitches that I
puzzle over. When there's a small diagram that shows how to do a
certain stitch, do I follow it just the way it's shown or do I double
it like the cross stitches? Take Hardanger for example: If the
diagram shows the Kloster blocks going over 4 threads, do I do just the
4 or double it to 8? Or if an eyelet stitch shows it over 3 threads on
the longest vertical and horizontal legs, is it just 3 or 6? Sorry if
this seems like a silly question, but my poor mind tends to boggle when
trying (or even thinking about doing) something new.

--
Suze
Cat hair? That's just an embellishment.




  #4  
Old July 12th 04, 06:05 AM
Fred
external usenet poster
 
Posts: n/a
Default

"Over 2 means" "Over 2". It doesn't mean "x2" or "times(2)". In all
likelihood most stitches on the design would be "over 2". The exception
might be some backstitches and possibly couching. You could also toss in
quarter stitches which would be "over 1" but that's another story.

A quality chart would probably have "text/instructions" advising to "stitch
over 2" and any deviation from that would show up as a sketch of the stitch
required. The chart designer may also provide a sketch showing how to stitch
"over 2".

I might add that most symphony orchestras delve into "Over 2s".

Fred
http://www.stitchaway.com

W.I.P. - "Fiddler on the Roof".
W.I.L., "Romantic Venice",
"Ocean Princess", "Southwest Charm",
"Rainbow Trail", "Indian Pottery", "One Earth",
"Spirit of the Full Moon"
and "+?", "+?", "+?".

"Suzanne" wrote in message
news:200407110128552781%suzette40@comcastcrossnets titch...
Looking at different books and magazines, I've found many over-2
patterns I'd like to do sometime. Though I have yet to work anything
over 2 threads, I'm a little confused about something. Actually, I
think I've done one piece, but it's been a very long time and it didn't
have any special stitches in it. It's the special stitches that I
puzzle over. When there's a small diagram that shows how to do a
certain stitch, do I follow it just the way it's shown or do I double
it like the cross stitches? Take Hardanger for example: If the
diagram shows the Kloster blocks going over 4 threads, do I do just the
4 or double it to 8? Or if an eyelet stitch shows it over 3 threads on
the longest vertical and horizontal legs, is it just 3 or 6? Sorry if
this seems like a silly question, but my poor mind tends to boggle when
trying (or even thinking about doing) something new.

--
Suze
Cat hair? That's just an embellishment.



  #5  
Old July 12th 04, 07:53 AM
Suzanne
external usenet poster
 
Posts: n/a
Default

On 2004-07-11 07:22:26 -0500, (NYC Chicka) said:

Looking at different books and magazines, I've found many over-2
patterns I'd like to do sometime. Though I have yet to work anything
over 2 threads, I'm a little confused about something. Actually, I
think I've done one piece, but it's been a very long time and it didn't
have any special stitches in it. It's the special stitches that I
puzzle over. When there's a small diagram that shows how to do a
certain stitch, do I follow it just the way it's shown or do I double
it like the cross stitches? Take Hardanger for example: If the
diagram shows the Kloster blocks going over 4 threads, do I do just the
4 or double it to 8? Or if an eyelet stitch shows it over 3 threads on
the longest vertical and horizontal legs, is it just 3 or 6? Sorry if
this seems like a silly question, but my poor mind tends to boggle when
trying (or even thinking about doing) something new.

Not silly, Suze. If you're not familiar with it then it's a perfectly
legitimate question. =)

Most specialty stitches are charted to show it being worked on a
linen/evenweave type of fabric. Therefore, if the chart shows it goes over 4
threads, then you only need to go over 4 threads on your linen/evenweave.

Depending upon the age of your normal cross stitch charts... they might have
charted regular cross stitches as if they were on Aida so it would just show
one block. That's why you're getting confused with the *needing to double it
like the cross stitches.* Most (many) newer charts show the regular stitches
over two threads as well.

Enjoy the new experience. Do you have any friends around that stitch on
linen/evenweave, or do you think the women at your LNS do? Sometimes it's
easier to have them look over your first attempts until you get the hang of
it... predominantly just to make sure your bottom stitches go from vertical
thread to vertical thread.
wendy



Thanks, that makes me feel better. The only friends I have that stitch
are on here, and I don't have an LNS, just Hobby Lobby and Michaels.
Thanks!
--
Suze
Cat hair? That's just an embellishment.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
To Sue Dawson/ Arts & Crafts Era Threads sewingsusan Needlework 8 May 26th 04 03:09 AM
Tips for working "in the hand" elaine Needlework 8 March 21st 04 12:27 PM
Working mullioned windows Cathy Weeks Doll Houses 1 February 22nd 04 10:36 AM
? for needlepointers on using different type threads in one piece Mmeindia Needlework 8 July 30th 03 04:22 AM
Iron-on Krenik Threads Lula Needlework 3 July 24th 03 07:05 AM


All times are GMT +1. The time now is 12:12 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.