If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
strange thread tension problem
Hi everyone
I have Brother PS-31 sewing machine and I've been having weird lower thread tension problems. The problem only seems to occur with straight stitch or that's where it's most visible. I can never get the bobbin thread tension right, it's either too strong or too weak. I've tried to change the tension on the bobbin case lots of times but it just never looks right. Could there be a problem with the bobbin case? Any suggestions appreicated! Thanks, Vilna |
Ads |
#2
|
|||
|
|||
Vilna wrote:
Hi everyone I have Brother PS-31 sewing machine and I've been having weird lower thread tension problems. The problem only seems to occur with straight stitch or that's where it's most visible. I can never get the bobbin thread tension right, it's either too strong or too weak. I've tried to change the tension on the bobbin case lots of times but it just never looks right. Could there be a problem with the bobbin case? Any suggestions appreicated! Thanks, Vilna What are the symptoms? Most problems are caused by top thread tension maladjustment: loops on the bottom: top thread too loose. Loops on the top: top thread too tight. -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! |
#3
|
|||
|
|||
Hi
When the thread tension is meant to be correct (no loops form either on top or underneath)the stitch underneath looks wonky. Like the thread isn't tight enough (but no loops). But when I increase the bobbin case tension the bobbin thread will be too tight and loops appear. I've played with it so many times and it just doesn't work. Sometimes the stitch starts out perfect but very soon it will be back to wonky underneath. Any ideas? Thanks Vilna (Vilna) wrote in message om... Hi everyone I have Brother PS-31 sewing machine and I've been having weird lower thread tension problems. The problem only seems to occur with straight stitch or that's where it's most visible. I can never get the bobbin thread tension right, it's either too strong or too weak. I've tried to change the tension on the bobbin case lots of times but it just never looks right. Could there be a problem with the bobbin case? Any suggestions appreicated! Thanks, Vilna |
#4
|
|||
|
|||
Are you using a heavier thread in the bobbin case? This will cause that
look. -- Ron Anderson A1 Sewing Machine PO Box 60 Sand Lake, NY 12153 518-469-5133 http://www.a1sewingmachine.com "Vilna" wrote in message om... Hi When the thread tension is meant to be correct (no loops form either on top or underneath)the stitch underneath looks wonky. Like the thread isn't tight enough (but no loops). But when I increase the bobbin case tension the bobbin thread will be too tight and loops appear. I've played with it so many times and it just doesn't work. Sometimes the stitch starts out perfect but very soon it will be back to wonky underneath. Any ideas? Thanks Vilna (Vilna) wrote in message om... Hi everyone I have Brother PS-31 sewing machine and I've been having weird lower thread tension problems. The problem only seems to occur with straight stitch or that's where it's most visible. I can never get the bobbin thread tension right, it's either too strong or too weak. I've tried to change the tension on the bobbin case lots of times but it just never looks right. Could there be a problem with the bobbin case? Any suggestions appreicated! Thanks, Vilna |
#5
|
|||
|
|||
I'm using the same thread in the bobbin case as on top (good quality polyester).
Vilna "Ron Anderson" wrote in message link.net... Are you using a heavier thread in the bobbin case? This will cause that look. -- Ron Anderson A1 Sewing Machine PO Box 60 Sand Lake, NY 12153 518-469-5133 http://www.a1sewingmachine.com "Vilna" wrote in message om... Hi When the thread tension is meant to be correct (no loops form either on top or underneath)the stitch underneath looks wonky. Like the thread isn't tight enough (but no loops). But when I increase the bobbin case tension the bobbin thread will be too tight and loops appear. I've played with it so many times and it just doesn't work. Sometimes the stitch starts out perfect but very soon it will be back to wonky underneath. Any ideas? Thanks Vilna (Vilna) wrote in message om... Hi everyone I have Brother PS-31 sewing machine and I've been having weird lower thread tension problems. The problem only seems to occur with straight stitch or that's where it's most visible. I can never get the bobbin thread tension right, it's either too strong or too weak. I've tried to change the tension on the bobbin case lots of times but it just never looks right. Could there be a problem with the bobbin case? Any suggestions appreicated! Thanks, Vilna |
#6
|
|||
|
|||
Change the thread to cotton covered polyester or cotton, both top and bottom
and change the needle..make sure the flat side is positioned where it should be according to your machine. alice "Vilna" wrote in message om... I'm using the same thread in the bobbin case as on top (good quality polyester). Vilna "Ron Anderson" wrote in message link.net... Are you using a heavier thread in the bobbin case? This will cause that look. -- Ron Anderson A1 Sewing Machine PO Box 60 Sand Lake, NY 12153 518-469-5133 http://www.a1sewingmachine.com "Vilna" wrote in message om... Hi When the thread tension is meant to be correct (no loops form either on top or underneath)the stitch underneath looks wonky. Like the thread isn't tight enough (but no loops). But when I increase the bobbin case tension the bobbin thread will be too tight and loops appear. I've played with it so many times and it just doesn't work. Sometimes the stitch starts out perfect but very soon it will be back to wonky underneath. Any ideas? Thanks Vilna (Vilna) wrote in message om... Hi everyone I have Brother PS-31 sewing machine and I've been having weird lower thread tension problems. The problem only seems to occur with straight stitch or that's where it's most visible. I can never get the bobbin thread tension right, it's either too strong or too weak. I've tried to change the tension on the bobbin case lots of times but it just never looks right. Could there be a problem with the bobbin case? Any suggestions appreicated! Thanks, Vilna |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HELP!!! Thread nest problem!!! | hfw | Quilting | 4 | December 20th 04 01:35 PM |
Glow Bug Thread | C & S | Quilting | 1 | August 25th 04 03:09 AM |
Thread alert | Mardi | Quilting | 0 | May 25th 04 03:00 AM |
Help! Tension problems? | Cina | Quilting | 11 | December 17th 03 11:53 PM |
Xmas ornament pattern | Laurie | Beads | 1 | July 6th 03 04:21 PM |