If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
bicycle spinning?
Looking at the cd spindle got me to thinking about spinning in general. I
cleaned carded dyed and spun some raw wool in high school but i havent had a chance to try it again....i'd like to before i hit retirement So spinner women/men of the board i am wondering about something...i am a bicyclist..and i have this old bike frame here with a warped back wheel that i havent been able to straighten. On the other hand..maybe i could turn the bike upside down...cut open the tire to make a channel ( not sure about the right words here) and use it to spin? Would this work? laurie with too much time on my hands apparently |
Ads |
#2
|
|||
|
|||
In article OPChc.201470$oR5.95068@pd7tw3no, Llaurie wrote:
So spinner women/men of the board i am wondering about something...i am a bicyclist..and i have this old bike frame here with a warped back wheel that i havent been able to straighten. On the other hand..maybe i could turn the bike upside down...cut open the tire to make a channel ( not sure about the right words here) and use it to spin? Would this work? laurie with too much time on my hands apparently Way too much time... You know, the wheel can be changed for a not-bent wheel, unless it has a weird gear ratio like one I saw from the 1940s. However, a bicycle wheel without its tire _has_ a channel, a very deep one, that has the ends of the bicycle spokes in it. I think the wheel on a spinning wheel is more for a drive ratio than for anything directly involving the yarn. However, I'd be intrigued by a way to make a bicycle into a swift or a ball-winder. It already has the gear-drive and crank (pedal shaft). =Tamar |
#3
|
|||
|
|||
There's a book titled (I believe) "Spinning and Weaving at Home" which
discusses converting old bicycle frames into spinning wheels and provides detailed instructions for same. It is IIRC a British publication, possibly one of the Shire Album series of books. |
#4
|
|||
|
|||
Llaurie...
That's an AMAZINGLY BRILLIANT idea!!! I wish I thought of it! Let me know how it goes...I'm sure it can't be that difficult. Making a spinning wheel out of wood, the wheel is probably the most difficult part, getting it balanced correctly and all. Let me ask a friend who's good with this stuff...I'll let you know what I find out. Allaya "Llaurie" wrote in message news:OPChc.201470$oR5.95068@pd7tw3no... Looking at the cd spindle got me to thinking about spinning in general. I cleaned carded dyed and spun some raw wool in high school but i havent had a chance to try it again....i'd like to before i hit retirement So spinner women/men of the board i am wondering about something...i am a bicyclist..and i have this old bike frame here with a warped back wheel that i havent been able to straighten. On the other hand..maybe i could turn the bike upside down...cut open the tire to make a channel ( not sure about the right words here) and use it to spin? Would this work? laurie with too much time on my hands apparently |
#5
|
|||
|
|||
In article OPChc.201470$oR5.95068@pd7tw3no, "Llaurie" wrote:
Looking at the cd spindle got me to thinking about spinning in general. I cleaned carded dyed and spun some raw wool in high school but i havent had a chance to try it again....i'd like to before i hit retirement So spinner women/men of the board i am wondering about something...i am a bicyclist..and i have this old bike frame here with a warped back wheel that i havent been able to straighten. On the other hand..maybe i could turn the bike upside down...cut open the tire to make a channel ( not sure about the right words here) and use it to spin? Would this work? laurie with too much time on my hands apparently Not a new idea and a very good idea. I subscribe to a Dutch magazine, it deals with textiles around the world. In it, some years ago there was an article about India and the spinning of cotton. They used bycicle wheels as part of their very modern spinning wheels. I could try to photo copy the picture for you if you like so you have an idea what it looks like. I have a feeling though that you may be able to find plans for a spinningwheel, using bike parts on the internet. Els -- I have added a trap for spammers......niet..... |
#6
|
|||
|
|||
Llaurie wrote::
..maybe i could turn the bike upside down...cut open the tire to make a channel ( not sure about the right words here) and use it to spin? Would this work? Chiming in with Els and Slinky...I remember seeing yet another book referring to doing this. Can't remember if it had plans, or merely discussed someone making and selling them. It was published sometime in the '70's or so, in America; but naturally, I don't remember the title or anything. No doubt OOP anyway. But if you do a web search, you should come up with *something* on it! I do have the vague impression that the book said wheels made this way spun quite nicely. Even if you had to get a new wheel, and get someone with a torch to do some cutting, still - it'd possibly be cheaper than a regular wheel! Monica CMMPDX2 at aol remove 'eat.spam' to email me --------- "No, that isn't me you saw - I'm not here, I'm incognito!" (Me, Myself & I) Support our Troops!! http://www.wtv-zone.com/kjsb/bataan.html |
#7
|
|||
|
|||
I've seen two or three variations on that theme. One turned a bicycle wheel
into the drive wheel for a simple Great Wheel ( as opposed to a flyer wheel). That is the simplest, but means spinning off the point. Another used a replacement Ashford head to build a flyer wheel. Third, someone fit an Ashford replacement head to an exercise bike. That one was a real hit at demos! Helen "Halla" Fleischer, Fantasy & Fiber Artist http://home.covad.net/~drgandalf/halla/ Balticon Art Program Coordinator http://www.balticon.org |
#9
|
|||
|
|||
"Richard Eney" wrote in message snipped my org message Way too much time... You know, the wheel can be changed for a not-bent wheel, unless it has a weird gear ratio like one I saw from the 1940s. However, a bicycle wheel without its tire _has_ a channel, a very deep one, that has the ends of the bicycle spokes in it. I think the wheel on a spinning wheel is more for a drive ratio than for anything directly involving the yarn. However, I'd be intrigued by a way to make a bicycle into a swift or a ball-winder. It already has the gear-drive and crank (pedal shaft). =Tamar I repair my own bike usually - just that this wheel no matter what i do will not come 'true'...and actually its a whole extra bike too Are you saying that the wheel part would not be what the yarn would be wound on ? ( the fact that there are spoke tips is why i was thinking of just cutting the bottom third of the actual tire off - to make the channel smoother) I had this idea of sitting..slowly pedaling as i twist and wind the wool? Maybe my recollection of spinning is too hazy Being a neophyte i have no idea about a swift or ball winder laurie |
#10
|
|||
|
|||
Thank you! i'll take a look for it
laurie "Slinky" wrote in message ... There's a book titled (I believe) "Spinning and Weaving at Home" which discusses converting old bicycle frames into spinning wheels and provides detailed instructions for same. It is IIRC a British publication, possibly one of the Shire Album series of books. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cotton Spinning 1913 weaving vintage FA | Sarah Mc. | Marketplace | 0 | October 29th 04 12:58 AM |
correction...should read antique french spinning wheel not spinning machine | Jacqueline Butt | Yarn | 0 | November 25th 03 12:32 AM |
Converts to spinning | CMM PDX2 | Yarn | 7 | October 30th 03 12:50 AM |
Spinning and Weaving | Neal Rogers | Yarn | 80 | August 22nd 03 10:35 AM |
Bicycle clips | Sarah Curry | Quilting | 0 | July 13th 03 04:29 PM |