If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Frustrating Sewing Machine Problem
Hi folks,
I'm new to this group and plan to check in often. Right now I'm hoping someone can help me with a problem I'm having with my sewing machine. I have an old but seldom used Singer model 8602 -- a low-end model with no special features. I've been using for a few days to make a window treatment for the guest bedroom. Nothing fancy -- just straight sewing. The machine was working fine for the first couple of days. Then, one morning when I first started to sew, things when haywire. What's happening is hard to describe, but I'll do my best. As I sewed, only part of the top thread went through the needle and fabric. Some of the tread sort of peeled off and bunched up at the needle. This continued until I either noticed and stopped or until the thread broke. (I hope that makes sense.) I should note that I didn't change anything from the day before except the color of the thread and fabric. And I know it's not bad thread because I tried four different spools. All did the same thing. I also changed the needle just in case that was the problem, but it wasn't. Can anyone help? Thanks in advance. -- 8^)~~~ Sue (remove the x to e-mail) ~~~~~~ "I reserve the absolute right to be smarter today than I was yesterday." -Adlai Stevenson http://home.earthlink.net/~sme617 |
Ads |
#2
|
|||
|
|||
Suzie-Q wrote:
I'm new to this group and plan to check in often. Right now I'm hoping someone can help me with a problem I'm having with my sewing machine. Welcome :-) As I sewed, only part of the top thread went through the needle and fabric. Some of the tread sort of peeled off and bunched up at the needle. This continued until I either noticed and stopped or until the thread broke. (I hope that makes sense.) I should note that I didn't change anything from the day before except the color of the thread and fabric. And I know it's not bad thread because I tried four different spools. I don't know why it just started happening in the middle of a project, but it's caused by the thread being pulled in and out of the eye of the needle as you stitch. A machine works by making a loop of needle thread under the fabric. You can see the basics at http://web.mit.edu/2.972/www/reports..._machine.htm-1, which I still think is an amazingly cool place. The loop of needle thread is pulled taught by the take-up lever as the stitch is completed. The take-up lever is the little arm that sticks out of the leftmost front of the machine and hits you in the forehead if you lean in too close. If you want to see it in action, thread the machine with white thread. Raise the take-up lever and needle to their highest points and put a little dot of dark marker pen on the thread above the last thread guide above the needle. Now sew very very slowly, and see how many times that little dot goes through the eye of the needle before it finally get locked into a stitch in the fabric. So, how to fix it? You say you're not using "bad" thread, but are you using Coats & Clark? If so, switch to Gutterman or Mettler. Change the needle to a demin needle: it has a sharper point, to better penetrate the fabric, and a larger "scarf", which is the hollowed-out bit above the eye of the needle. The scarf helps to protect the thread from being abraded by the fabric as it passes through. If they don't work you could try a little of a lubricant called "Sewers Aid" (no apostrophe). You can buy it from Clotilde (www.clotilde.com) or your local quilt shop may have some. You run three lines of it from top to bottom of the spool of thread, and put a drop on the machine at every place the thread rubs. You could also try a machine embroidery needle. They have even bigger scarfs, to protect fragile machine embroidery threads. Some of the old Singers are notorious for have tension problems and being picky about thread. My Mum had one that nearly put me off sewing for life. If you plan on doing lots of sewing it might be worth you watching out for another, second hand, machine such as a basic Bernina or a Singer 301. HTH -- Sally Holmes Wakefield, West Yorkshire, England |
#3
|
|||
|
|||
Suzie-Q wrote:
Hi folks, I'm new to this group and plan to check in often. Right now I'm hoping someone can help me with a problem I'm having with my sewing machine. I have an old but seldom used Singer model 8602 -- a low-end model with no special features. I've been using for a few days to make a window treatment for the guest bedroom. Nothing fancy -- just straight sewing. The machine was working fine for the first couple of days. Then, one morning when I first started to sew, things when haywire. What's happening is hard to describe, but I'll do my best. As I sewed, only part of the top thread went through the needle and fabric. Some of the tread sort of peeled off and bunched up at the needle. This continued until I either noticed and stopped or until the thread broke. (I hope that makes sense.) I should note that I didn't change anything from the day before except the color of the thread and fabric. And I know it's not bad thread because I tried four different spools. All did the same thing. I also changed the needle just in case that was the problem, but it wasn't. Can anyone help? Thanks in advance. My first thought is a burr on the needle eye. Change the needle! If that doesn't work, change the thread: some machines are picky about thread. I like Gutterman poly and cotton threads, and their silk is good too. If you are sewing thick fabric, use a thicker needle. I tend to use Jeans needles in a 90 or 100 size for decor fabric projects. -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! |
#5
|
|||
|
|||
On Fri, 14 May 2004 05:01:49 GMT, Suzie-Q wrote:
I'm new to this group and plan to check in often. Right now I'm hoping someone can help me with a problem I'm having with my sewing machine. I have an old but seldom used Singer model 8602 -- a low-end model with no special features. What size and brand of needle are you using? Most Singers are timed for Singer brand needles, and you'll get your best stitching with them. I'd suggest a #14 or #16 sharp for most "regular" curtain fabrics; probably about a #8 or 10 for sheers. What it sounds like is that you've either got a burr in the thread path that's cutting the thread (sounds like you're using a "dual duty" type thread, cotton wound poly, which I detest), or the thread's not good, or the peeling process is starting at the needle eye, which can happen with heavy thread and a small needle. Or it could be an operator error. Let's try the easy stuff first: 1) first try threading with the presser foot up, so the thread can properly enter the tensions. When you've threaded, pull both bobbin and top thread behind the foot. Lower the presser foot and drop the needle into the fabric with the handwheel *while still holding the ends of the thread*. Take a few stitches, and then you can let go of the ends. 2) new needle, correct size and type -- even though you just changed it. 3) then new thread (I far prefer straight polyester or straight cotton over dual duty type threads) 4) finally-- feel back all along the thread path looking for sharp edges. You can "floss" all the eyes with a bit of silk thread or a skinny strip of panty hose fabric, and see if there's any snags or sharp edges. These can be polished out with crocus cloth or abrasive- impregnated string, though that's a job I prefer to leave to my sewing machine mechanic. Check the needleplate hole (the thing the needle goes through, between the feed dogs) and the bobbin case for sharp edges or nicks, too (this is usually a busted needle or sewing over pins issue)... they also can be polished out with crocus cloth, and I'll do these areas myself. with fine emery |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FAQs for RCTQ | Diana Curtis | Quilting | 7 | October 4th 04 02:16 AM |
FA: $3.50 Vogue Sewing Book, Revised Edition | EoI | Marketplace | 0 | June 13th 04 04:27 PM |
FAQs for RCTQ | Diana Curtis | Quilting | 17 | April 2nd 04 07:59 PM |
sewing machine feet prices/quality | Taria | Quilting | 0 | March 30th 04 08:14 PM |
OT - Info from old sewing machine manual | Tia Mary-remove nekoluvr to reply | Quilting | 17 | February 4th 04 03:58 PM |