If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What a difference an iron makes...
Boy, I guess I'm spoiled!
I took a class last week (Jackie Robinson's Frank LLoyd Wright quilts -- loads of fun), and I was having all kinds of trouble with my piecing. I was one frustrated camper. I was thinking to myself it was because I was sewing multiple seams and then pressing to one side, where normally I sew one seam and press it open. (I've learned if a teacher wants stuff pressed to one side, it's not worth it to argue, because any problem I have will then be blamed on pressing seams open.) I got home and DH was all enthused about the quilt, so I worked on it some more. And suddenly everything was behaving! At first I thought it was the open vs. one side issue, but I realized that I took a class a couple of months earlier where I pressed to one side and had no trouble. So why was this class different? Suddenly, it dawned on me. The earlier class I was using my own iron. The recent class I was using someone else's iron, which was not very hot (and produced almost no steam, despite being a steam generator). Wowie, what a difference it makes to have an iron that gets hot enough! Now I'm kicking myself, because I had my iron with me, and it seemed like there were plenty of irons in class so I didn't set it up. Next time I'll know better. -- Kathy A. (Woodland, CA) longarm machine quilting, Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply |
Ads |
#2
|
|||
|
|||
Hey Kathy:
Yes, a good iron does make a difference. I was having trouble with my applique pieces. My steam iron would live "dimples" after I pressed the pieces. I knew I needed "dry" iron. I searched everywhere for just one, no luck. I went to a street fair and found one that was made in 1936 and it still worked. Only 9 dollars and I walked away with it. My applique pieces are now pressed with a hot iron and come out perfect. Kate T. South Mississippi "Kathy Applebaum" wrote in message . .. Boy, I guess I'm spoiled! I took a class last week (Jackie Robinson's Frank LLoyd Wright quilts -- loads of fun), and I was having all kinds of trouble with my piecing. I was one frustrated camper. I was thinking to myself it was because I was sewing multiple seams and then pressing to one side, where normally I sew one seam and press it open. (I've learned if a teacher wants stuff pressed to one side, it's not worth it to argue, because any problem I have will then be blamed on pressing seams open.) I got home and DH was all enthused about the quilt, so I worked on it some more. And suddenly everything was behaving! At first I thought it was the open vs. one side issue, but I realized that I took a class a couple of months earlier where I pressed to one side and had no trouble. So why was this class different? Suddenly, it dawned on me. The earlier class I was using my own iron. The recent class I was using someone else's iron, which was not very hot (and produced almost no steam, despite being a steam generator). Wowie, what a difference it makes to have an iron that gets hot enough! Now I'm kicking myself, because I had my iron with me, and it seemed like there were plenty of irons in class so I didn't set it up. Next time I'll know better. -- Kathy A. (Woodland, CA) longarm machine quilting, Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply |
#3
|
|||
|
|||
Okay, you sold me! g What is this wonderful iron?
--Heidi "Kathy Applebaum" wrote in message . .. Boy, I guess I'm spoiled! Suddenly, it dawned on me. The earlier class I was using my own iron. The recent class I was using someone else's iron, which was not very hot (and produced almost no steam, despite being a steam generator). Wowie, what a difference it makes to have an iron that gets hot enough! Now I'm kicking myself, because I had my iron with me, and it seemed like there were plenty of irons in class so I didn't set it up. Next time I'll know better. -- Kathy A. (Woodland, CA) longarm machine quilting, Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply |
#4
|
|||
|
|||
Actually, I had a similar experience recently. Went to class with my 28mm
rotary cutter, as required. Instructor didn't like that kind because of visibility, so lent some of us cutters of her own. Argh. Dull blades. I struggled and struggled on Drunkard's Path kinds of pieces. Came home and did it with my 28mm with not much problem, but absolutely sailed through them with my18mm cutter. --Heidi " Suddenly, it dawned on me. The earlier class I was using my own iron. The recent class I was using someone else's iron, which was not very hot (and produced almost no steam, despite being a steam generator). Wowie, what a difference it makes to have an iron that gets hot enough! Now I'm kicking myself, because I had my iron with me, and it seemed like there were plenty of irons in class so I didn't set it up. Next time I'll know better. -- Kathy A. (Woodland, CA) longarm machine quilting, Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply |
#5
|
|||
|
|||
"hfw" wrote in message ... Okay, you sold me! g What is this wonderful iron? It happens to be a Rowenta, but when I bought it I did a lot of research and discovered that the wattage is more important than the brand. (Well, also the internal temperature regulator, but you can't find out how that's set.) I had previously had a 1200 watt iron I didn't think was hot enough, so I got a 1440 watt for home and an 1800 watt for work. Both are PLENTY hot, believe you me! -- Kathy A. (Woodland, CA) longarm machine quilting, Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply |
#6
|
|||
|
|||
With an iron like that, think of the added benefit of the muscle building in
your arm. The downside is you will have to work the other or you will look lop-sided! VBG -- Sugar & Spice Quilts by Linda E http://community.webshots.com/user/frame242 |
#7
|
|||
|
|||
"nana2b" wrote in message ... With an iron like that, think of the added benefit of the muscle building in your arm. The downside is you will have to work the other or you will look lop-sided! VBG Ah, but I already have a longarm. Unless I get another one, I'll be lopsided anyways! ROFLOL -- Kathy A. (Woodland, CA) longarm machine quilting, Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: MUST HAVE Access. for Singer FW's, Quilters, Doll Makers, etc. | singer_fw_iron_lover | Marketplace | 0 | September 2nd 04 09:10 PM |
FS: Vintage Singer Featherweight Iron -- Best Piecing Iron Available! | singer_fw_iron_lover | Marketplace | 0 | August 14th 04 08:10 PM |
FS: Vintage Singer Featherweight Iron -- Best Piecing Iron Available! | singer_fw_iron_lover | Marketplace | 0 | August 14th 04 08:09 PM |
fs&fa FOR QUILT PIECING, Doll Clothes Piecing, Children Clothes Piecing – FINEST IRON AVAILABLE AT ANY PRICE! | singer_fw_iron_lover | Marketplace | 1 | August 9th 04 11:10 PM |
Iron kvetching was Re Happy ending for Joann coupon. | Elena | Quilting | 7 | July 13th 03 08:48 AM |