If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Mastering the art of
rolled hems on the machine!
Any tips for starting and ending the hems so they aren't lumpy, please? In between the start and end the hems come out very nicely... TIA |
Ads |
#2
|
|||
|
|||
Arri London wrote:
rolled hems on the machine! Any tips for starting and ending the hems so they aren't lumpy, please? In between the start and end the hems come out very nicely... TIA The very best success I've had is to start the RH a little way from the end (say, half an inch) and then needleturn it by hand when the machined hem is completed. If you sew off the end of the fabric, there's no reason for the opposite end to become lumpy: you can use a long pin (quilter's pin) to guide the fabric into the RH foot. With practice, rolled hems are very easy to do, but having said that, I can honestly say it's the important or in-a-hurry one that'll go wrong for you *every* time! =:-0 -- Trish {|:-} Newcastle, Australia |
#3
|
|||
|
|||
Arri London wrote:
rolled hems on the machine! Any tips for starting and ending the hems so they aren't lumpy, please? In between the start and end the hems come out very nicely... TIA Fold the first inch over to the right width twice, and pin to a bit of paper... Sew off the paper onto the fabric for two or three stitches, stop with the needle down, and raise the presser foot. Gently tug the fabric into the curl of the presser foot, lower it, and continue sewing. The paper tears off really easily afterwards, and this method works for two rolled hems meeting at a corner. Leave long tails that you can tidy any raw corners with, and then slide them up the hem to finish off. The best photos and explanation of this come from Fine Machine Sewing by Carol Laflin Ahles, ISBN 1 56158 153 4 (Taunton Press 1966), $24.95 (USA). -- Kate XXXXXX R.C.T.Q Madame Chef des Trolls Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.katedicey.co.uk Click on Kate's Pages and explore! |
#4
|
|||
|
|||
Trish Brown wrote: Arri London wrote: rolled hems on the machine! Any tips for starting and ending the hems so they aren't lumpy, please? In between the start and end the hems come out very nicely... TIA The very best success I've had is to start the RH a little way from the end (say, half an inch) and then needleturn it by hand when the machined hem is completed. If you sew off the end of the fabric, there's no reason for the opposite end to become lumpy: you can use a long pin (quilter's pin) to guide the fabric into the RH foot. With practice, rolled hems are very easy to do, but having said that, I can honestly say it's the important or in-a-hurry one that'll go wrong for you *every* time! =:-0 -- Trish {|:-} Newcastle, Australia TY. Yes been practising on the soft muslin so I don't waste my nice silk. The hem is indeed easy...it's the start and stop that are difficult LOL. |
#5
|
|||
|
|||
Kate Dicey wrote: Arri London wrote: rolled hems on the machine! Any tips for starting and ending the hems so they aren't lumpy, please? In between the start and end the hems come out very nicely... TIA Fold the first inch over to the right width twice, and pin to a bit of paper... Sew off the paper onto the fabric for two or three stitches, stop with the needle down, and raise the presser foot. Gently tug the fabric into the curl of the presser foot, lower it, and continue sewing. The paper tears off really easily afterwards, and this method works for two rolled hems meeting at a corner. Leave long tails that you can tidy any raw corners with, and then slide them up the hem to finish off. The best photos and explanation of this come from Fine Machine Sewing by Carol Laflin Ahles, ISBN 1 56158 153 4 (Taunton Press 1966), $24.95 (USA). -- Kate TY. That does make sense and I use the sew-off-the paper thing for other tricky bits. Seem to remember reading that book; must take it out of the library again. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mastering Cone Six Glazes, Our Test Results | GaSeku | Pottery | 18 | January 30th 04 04:58 PM |
Mastering Cone 6 Glazes | D Kat | Pottery | 4 | January 30th 04 01:09 AM |