Check with the manual that you have received the correct clamps, etc., with
the machine. You might find something useful on ribber adjustment in the
files if you join the Knittingmachines list -
http://groups.yahoo.com/group/Knittingmachines/

I have never had a Toyota, so I can't give you any specific help there.
With your ribber, with all needles in work do not try to use any yarn
thicker than one that would knit to a handknitting tension of 30 stitches to
10cm, and around 26/28 stitches to 10cm for 1 x 1 rib, until you are more
experienced and know that you have everything working correctly.


"RJ Squirrel" wrote in message
...

I'm a newbie Machine Knitter, having bought a KS901 machine and KR501
ribber on ebay about 9 months ago. The KS901 works great, but every
time I try to use the ribber, I end up breaking or bending needles and
going nuts. I've checked the assembly, and I believe I'm following the
instructions correctly, but I can't figure out why the needles are
jamming.