Quality ironing board cover

lid (joy=A0beeson)
snip
A drawstring doesn't hold very well on a long, narrow shape, so I
threaded carpet warp (cotton string) into a very large needle, and, in
three places under the board, took a stitch across and tied the ends
together with a surgeon's knot.
---
Joy,
I wonder if you could sew some little metal rings along the underside
(reinforce the edges first--w/ heavyweight bond on interfacing?)
and then run cording ziz-zag, side-to-side, tying off at each end?
Although I use a huge padded (with wool blankets) table for both
cutting and ironing/pressing, I own one of those nice, heavy-duty steel
gridded ironing boards. It's stashed. Saving it for the day when I get a
reeeeely big workroom, I suppose. Anyway, I remember the frustration
of those goofy little drawstrings they insert along the edges of
pre-made covers. Your description of making a perfect pressing surface
is right on. I have seen a heavier silver ironing board cloth for sale
in Joanne Fabrics. Constructed the way you describe, it would be a good
pressing surface.
I have scads of those little wood pressing doo-dads, which I use for
corners, points, etc, as well as hams, wood dowels, and a couple of
those cheap little mini ironing boards, which I set atop the cutting
table, and use for ironing shirts and dresses I intend to splurge on a
fer real press one day, as well as a gravity-feed iron.
Cea