Why does the needle not thread and seems to be hitting the edge ofthe bobbin case on my Bernina 1010?
 

Does anyone know why the needle won't thread and seems to be hitting the edge of the bobbin case on my old Bernina 1010

Why does the needle not thread and seems to be hitting the edgeof the bobbin case on my Bernina 1010?
 

On 08/20/2017 01:49 PM, wrote:

Does anyone know why the needle won't thread and seems to be hitting the edge of the bobbin case on my old Bernina 1010


I wouldn't know what is happening, but the first thing I would recommend
is putting in a new needle.

--
My Yonkoma: https://www.flickr.com/photos/brian0...57680223526176

The E-mail associated with the account is a "spamcatcher" account that I
got to every couple of months to empty out, and anything sent to it will
not be seen for probably several months, if it is seen at all.
Brian Christiansen

Why does the needle not thread and seems to be hitting the edge of the bobbin case on my Bernina 1010?
 

wrote in message
...


Does anyone know why the needle won't thread and seems to be hitting the
edge of the bobbin case on my old Bernina 1010

I used to have an older Singer that did something like that so I got out the
manual and looked at it page by page as I checked the machine until I saw
what I thought the problem was and adjusted it.
Hope this helps
Barbara in FL